Embedded Files
The front Door lock is connected to the Home Automation System.
Purchased: 2016-11-02
Vendor: Home Depot
Master Code and User Codes in LastPass under House Front Door Lock
Location: Front Door
TO ADD A USER CODE:
1. Extend the deadbolt.
2. Press Schlage button on touchscreen.
3. Enter the 6 digit Master Programming Code.
4. Press 1 (instructs lock to add new code)
5. Enter the new User Code (must be same length as all other codes)
6. Re-Enter the new User Code (to confirm).
7. Success is green tick and two beeps and two blinks.
TO DELETE A USER CODE:
1. Extend the deadbolt.
2. Press Schlage button on touchscreen.
3. Enter the 6 digit Master Programming Code.
4. Press 2 (instructs lock to delete an existing code)
5. Enter the existing User Code (must be same length as all other codes)
6. Re-Enter the existing User Code (to confirm).
7. Success is green tick and two beeps and two blinks.
TO DELETE ALL USER CODES:
1. Extend the deadbolt.
2. Press Schlage button on touchscreen.
3. Enter the 6 digit Master Programming Code.
4. Press 6 (instructs lock to delete all existing codes)
5. Success is green tick and two beeps and two blinks.
TO ENABLE/DISABLE AUTO-LOCK:
When Auto-Lock is enabled, the lock will automatically relock itself 30 seconds after being unlocked. This feature is disabled by default.
1. Extend the deadbolt.
2. Press Schlage button on touchscreen.
3. Enter the 6 digit Master Programming Code.
4. Press 9 (instructs lock to enable/disable usto-lock)
5. Enbled: one green tick and one beep.
5. Disabled: two green tick and two beeps.
Page updated
Google Sites
Report abuse